Li Ion Batterie Capacité Testeur
2.Spécification:5V2A
3.Aplication:Cylindre cellule
512 Canal Li Ion Cylindrique Batterie Capacité Testeur
Produit Vidéo
Spécification
1. Machine Décrire
TOB-512-2L Le périphérique est principalement composé de a communication interface et a batterie détection armoire. Le batterie test armoire est composé de batterie pince et a plaque corps à placement fixture, a constant courant constante tension source, a enregistrement contrôle circuit, a échantillonnage circuit, a simple puce micro-ordinateur et a contrôle panneau.
2.Main fonctionnalité
1) Chaque équipement peut faire constant courant ,constant tension charge et constant courant décharge pour 512 pcs de cellule qui est dans la tension plage.
2)Constant current-constant voltage power supply, constant current to constant voltage switching without impact, especially suitable for lithium ion battery charging requirements
3)Le périphérique adopte AVR monopuce ordinateur as the control center, and coopère with the peripheral sampling circuit, which can be controlled by the upper computer. When connected to the computer, the complete charge and discharge curve of all channels can be saved, or it can be separated from the upper computer and operated by the control panel. Constant current constant voltage charging, constant current discharge test, sorting par heure, etc.
4) Chaque batterie a son propre indépendant constant courant et constante tension source , et la boucle auto-formée ne fait pas affecte chaque autre.
5)A LED is mounted on each of the battery fixtures as an operational status display, and when the discharge is completed, it can be used to indicate battery capacity sorting.
6)Real-time detection each battery voltage, when charging, first constant current charging, when the battery voltage reaches the set value, it will smoothly transfer to constant voltage charging, when the set time or current termination condition is satisfied, the charging ends. When the constant current is discharged, when the battery voltage is lower than the set value, the discharge ends and the corresponding battery indicator lights up.
7)Avec mise hors tension protection fonction, le original workflow can continue à exécuter après le pouvoir retour
8)Le upper computer can set 32 working step parameters et 256 cycles. Each upper computer can connect 1 to 15 sets of single chip microcomputer system. (suggest ci-dessous 10 ensembles)
9)Prise en charge logiciel fonctionnalités
(1)Utilisez le graphique opération interface à afficher données tel as tension, current, time, and capacity of each battery, and display the corresponding working status and anormal conditions in various colors.
(2) Arbitraire segmenté batterie capacité indication (jusqu’à 100 segments)
(3) Le données points peuvent être enregistrés sel accordant aux conditions changeantes de tension, courant et temps à forme a complet charge et décharge courbe données, et le temps intervalle de la courbe données points est Inférieur à ou égal à 10 secondes.
(4) Batterie tri fonction sous conditions diverses (capacité, temps, ouvert
circuit tension, décharge plate-forme, etc.)
(5) Automatique calcul de constant courant charge ratio, capacité perte, décharge efficacité, moyenne tension, médiane tension, etc.
(6) Opérateur autorisation paramètre, hiérarchique opération
(7) Can display charge and discharge curve, cycle diagramme
2. Technique paramètre
|
Modèle |
TOB-512-2L |
|
Canal Non. |
512 |
|
Workflow contrôle méthode |
Entier Cabine contrôle |
|
Chargement modèle |
Constante tension,constant courant |
|
Charge coupure condition |
Tension, courant, temps, capacité |
|
Décharge mode |
Constant courant |
|
Décharge coupure condition |
Tension, temps, capacité |
|
Échantillonnage inspection cycle |
Inférieur de ou égal à 10s |
|
Tension mesure plage |
0~5V,Résolution 1mV |
|
|
Charge:0~4.5V,Discharge:4.5~2.5V |
|
Constante tension plage |
3~4.5V |
|
Tension précision |
±(0.05%RD+0.1%FS) |
|
Courant plage |
Charge:{{0}}.01-2A,Discharge :0.01-2A,Resolution:1mA |
|
Courant précision |
±(0.1%RD+0.1%FS) |
|
Heure Set Plage |
N’importe levant paramètre dans 0~30000 minutes, le temps unité is min |
|
Temps précision |
Inférieur à ou égal à ±{{0}}.1%0 |
|
Pince type |
Four-wire method fixture |
|
Pince réglage plage |
10mm-90mm |
|
Support batterie type |
Cylindre cellule |
|
Tension source |
3 phase 4 fil , AC380V±5% , 50HZ , Puissance consommation15KW |
|
communication méthode |
RS485,Baud taux 57600 |
|
Machine taille |
1440mm(length)×500mm(width)×1840mm(height |
|
travail environnement |
Température:0-40 degré ,related température Inférieur ou égal à 85% |
|
Plein charge fonctionnement courant |
Phase ligne haut vers 15A, zéro ligne haut à 3A |
|
Appareil démarrage courant |
Air interrupteur fermeture moment environ 60A |
|
N.W |
Anout 300kg |
|
Système principal configuration configuration requise
|
Minimum configuration de ordinateur système: CPU above P4, mémoire above 2G, hard disk space above 200G, EGA/VGA color display, one CD-ROM, one mouse, MicrosoftTM Windows XP and above, one available RS232 serial communication port, Windows support Printer. The computer system is self-contained by the user, and the number of microcomputer systems is determined according to actual needs. |
Produit Affichage


Notre Certificat
Plus CertificatsBrevet Certificat

Norme ISO 9001

Certificat CE

Contactez Nous
étiquette à chaud:
Une paire de
Testeur de pile bouton 5V50mAVous pourriez aussi aimer
Envoyez demande












